Emails

The following commands are available for OpenPanel Enterprise users:

MailServer

Using the opencli email-server command you can install and manage the mailserver:

opencli email-server

Example output

# opencli email-server
Usage:

opencli email-server status                           Show status
opencli email-server config                           Show configuration
opencli email-server install                          Install the email server  
opencli email-server start                            Start the email server
opencli email-server stop                             Stop the email server
opencli email-server restart                          Restart the email server
opencli email-server queue                            Show mail queue
opencli email-server flush                            Flush mail queue
opencli email-server view   <queue id>                Show mail by queue id
opencli email-server unhold <queue id> [<queue id>]   Release mail that was put "on hold" (marked with '!')
opencli email-server unhold ALL                       Release all mails that were put "on hold" (marked with '!')
opencli email-server delete <queue id> [<queue id>]   Delete mail from queue
opencli email-server delete ALL                       Delete all mails from queue
opencli email-server fail2ban [<ban|unban> <IP>]      Interact with fail2ban
opencli email-server fail2ban log                     Show fail2ban log
opencli email-server ports                            Show published ports
opencli email-server postconf                         Show postfix configuration
opencli email-server logs [-f]                        Show logs. Use -f to 'follow' the logs
opencli email-server login                            Run container shell
opencli email-server supervisor                       Interact with supervisorctl
opencli email-server pflogsumm                        Generate summary reports
opencli email-server postfwd                          Enable/disable postfwd rate-limiting and edit limits
opencli email-server uninstall                        Uninstall the email server
opencli email-server update-check                     Check for container package updates
opencli email-server update-packages                  Update container packages
opencli email-server versions                         Show versions

Install

To install mailserver:

opencli email-server install

Example output

# opencli email-server install
Installing the mailserver...
Cloning into '/usr/local/mail/openmail'...
...

Start

To start the mailserver:

opencli email-server start

Example output

# opencli email-server start
Starting mailserver...
MailServer started successfully.

Restart

To restart the mailserver:

opencli email-server restart

Example output

# opencli email-server restart
Restarting the mailserver...
MailServer stopped successfully.
MailServer started successfully.

Stop

To stop the mailserver:

opencli email-server stop

Example output

# opencli email-server stop
Stopping the mailserver...
MailServer stopped successfully.

Status

To view current mailserver status:

opencli email-server status

Example output

# opencli email-server status
Container:    Up 21 minutes (healthy)

Version:      v14.0.0


Packages:     Updates available

Ports:        25/tcp -> 0.0.0.0:25
              25/tcp -> [::]:25
              143/tcp -> 0.0.0.0:143
              143/tcp -> [::]:143
              465/tcp -> 0.0.0.0:465
              465/tcp -> [::]:465
              587/tcp -> 0.0.0.0:587
              587/tcp -> [::]:587
              993/tcp -> 0.0.0.0:993
              993/tcp -> [::]:993

Postfix:      Mail queue is empty

Supervisor:   amavis                           RUNNING   pid 910, uptime 0:20:23
              changedetector                   RUNNING   pid 949, uptime 0:20:23
              cron                             RUNNING   pid 803, uptime 0:20:25
              dovecot                          RUNNING   pid 813, uptime 0:20:25
              mailserver                       RUNNING   pid 8, uptime 0:21:06
              opendkim                         RUNNING   pid 848, uptime 0:20:24
              opendmarc                        RUNNING   pid 864, uptime 0:20:24
              postfix                          RUNNING   pid 876, uptime 0:20:24
              rsyslog                          RUNNING   pid 807, uptime 0:20:25
              update-check                     RUNNING   pid 822, uptime 0:20:24
              clamav                           STOPPED   Not started
              fail2ban                         STOPPED   Not started
              fetchmail                        STOPPED   Not started
              mta-sts-daemon                   STOPPED   Not started
              postgrey                         STOPPED   Not started
              postsrsd                         STOPPED   Not started
              rspamd                           STOPPED   Not started
              rspamd-redis                     STOPPED   Not started
              saslauthd_ldap                   STOPPED   Not started
              saslauthd_mysql                  STOPPED   Not started
              saslauthd_pam                    STOPPED   Not started
              saslauthd_rimap                  STOPPED   Not started
              saslauthd_shadow                 STOPPED   Not started

Config

To view active mailserver configuration:

opencli email-server config

Example output

# opencli email-server config
ACCOUNT_PROVISIONER='FILE'
AMAVIS_LOGLEVEL='0'
CLAMAV_MESSAGE_SIZE_LIMIT='25M'
DEFAULT_RELAY_HOST=''
DMS_VMAIL_GID='5000'
DMS_VMAIL_UID='5000'
DOVECOT_INET_PROTOCOLS='ipv4'
DOVECOT_MAILBOX_FORMAT='maildir'
DOVECOT_TLS='no'
ENABLE_AMAVIS='1'
ENABLE_CLAMAV='0'
ENABLE_DNSBL='0'
ENABLE_FAIL2BAN='0'
ENABLE_FETCHMAIL='0'
ENABLE_GETMAIL='0'
ENABLE_IMAP='1'
ENABLE_MANAGESIEVE='0'
ENABLE_OAUTH2='0'
ENABLE_OPENDKIM='1'
ENABLE_OPENDMARC='1'
ENABLE_POLICYD_SPF='1'
ENABLE_POP3='0'
ENABLE_POSTGREY='0'
ENABLE_QUOTAS='1'
ENABLE_RSPAMD='0'
ENABLE_RSPAMD_REDIS='0'
ENABLE_SASLAUTHD='0'
ENABLE_SPAMASSASSIN='0'

Queue

To view current mail queue:

opencli email-server queue

Example output

# opencli email-server queue
-Queue ID-  --Size-- ----Arrival Time---- -Sender/Recipient-------
4XbLqK2mPz*    1842 Wed Sep 24 10:12:05  [email protected]
                                         [email protected]

-- 2 Kbytes in 1 Request.

Flush Queue

To flush current mail queue:

opencli email-server flush

Example output

# opencli email-server flush
Queue flushed.

View

To view mail by queue id:

opencli email-server view <queue id>

Example output

# opencli email-server view 4XbLqK2mPz
*** ENVELOPE RECORDS deferred/4/4XbLqK2mPz ***
message_size:            1842             421               1               0            1842               0
message_arrival_time: Wed Sep 24 10:12:05 2026
sender: [email protected]
...
*** MESSAGE CONTENTS deferred/4/4XbLqK2mPz ***
...

Unhold

To release a specific mail that was put "on hold" (marked with '!'):

opencli email-server unhold <queue id> [<queue id>]

Example output

# opencli email-server unhold 4XbLqK2mPz
postsuper: 4XbLqK2mPz: released from hold
postsuper: Released 1 message

To release ALL mails that are put "on hold" (marked with '!'):

opencli email-server unhold ALL

Example output

# opencli email-server unhold ALL
postsuper: Released 3 messages

Delete

To delete specific mail from queue:

opencli email-server delete <queue id>

Example output

# opencli email-server delete 4XbLqK2mPz
postsuper: 4XbLqK2mPz: removed
postsuper: Deleted: 1 message

To delete multiple mails from wueue using their queue IDs :

opencli email-server delete <queue id> [<queue id>] [<queue id>] [<queue id>]

To delete ALL mails from queue:

opencli email-server delete ALL

Example output

# opencli email-server delete ALL
postsuper: Deleted: 12 messages

Fail2Ban

To interact with fail2ban:

opencli email-server fail2ban

Example output

# opencli email-server fail2ban
Banned in custom:        198.51.100.23
Banned in postfix-sasl:  203.0.113.77

To ban IP address using fail2ban:

opencli email-server fail2ban ban <IP>

Example output

# opencli email-server fail2ban ban 198.51.100.23
Banned custom IP: 1

To unban IP address using fail2ban:

opencli email-server fail2ban unban <IP>

Example output

# opencli email-server fail2ban unban 198.51.100.23
Unbanned IP from postfix-sasl: 1

To view fail2ban logs:

opencli email-server fail2ban log

Example output

# opencli email-server fail2ban log
2026-09-24 09:41:02,114 fail2ban.actions [512]: NOTICE  [postfix-sasl] Ban 203.0.113.77
...

Postfix

To view current postfix configuration:

opencli email-server postconf

Example output

# opencli email-server postconf
2bounce_notice_recipient = postmaster
access_map_defer_code = 450
access_map_reject_code = 554
address_verify_cache_cleanup_interval = 12h
address_verify_default_transport = $default_transport
address_verify_local_transport = $local_transport
address_verify_map = btree:$data_directory/verify_cache
address_verify_negative_cache = yes
address_verify_negative_expire_time = 3d
address_verify_negative_refresh_time = 3h
address_verify_pending_request_limit = 5000
address_verify_poll_count = ${stress?{1}:{3}}
address_verify_poll_delay = 3s
address_verify_positive_expire_time = 31d
address_verify_positive_refresh_time = 7d
...

Logs

Display mailserver logs:

opencli email-server logs

Example output

# opencli email-server logs
[   INF   ]  Welcome to docker-mailserver v14.0.0
[   INF   ]  Checking configuration
[   INF   ]  Configuring mail server
[   INF   ]  Starting daemons
[   INF   ]  mail.example.com is up and running
...

Use -f to 'follow' the logs:

opencli email-server logs -f

pflogsumm

Generate HTML reports from mail logs:

opencli email-server pflogsumm

Example output

# opencli email-server pflogsumm
Generating reports...
Generating email statistics reports.. This can take a while.
Done, adding reports to OpenAdmin interface
Completed

Rate-limiting (postfwd)

Show whether outgoing email rate-limiting (postfwd) is enabled:

opencli email-server postfwd

Example output

# opencli email-server postfwd
Rate-limiting is currently ENABLED.

Enable or disable rate-limiting:

opencli email-server postfwd enable
opencli email-server postfwd disable

Example output

# opencli email-server postfwd enable
Rate-limiting has been ENABLED.

# opencli email-server postfwd disable
Rate-limiting has been DISABLED.

View or edit the rate-limiting rules (the mailserver is reloaded after editing):

opencli email-server postfwd view
opencli email-server postfwd edit

Example output

# opencli email-server postfwd view
id=limit_stefan_example_com ; [email protected] ; protocol_state==RCPT
                action=rate(stefan_ratelimit/100/3600/450 4.7.1 sorry, OpenPanel account reached limit of 100 emails per hour)
...

Rules for users and domains are generated with opencli email-ratelimit.

Supervisor

Interact with the supervisor:

opencli email-server supervisor

Example output

# opencli email-server supervisor
amavis                           RUNNING   pid 910, uptime 0:38:23
changedetector                   RUNNING   pid 949, uptime 0:38:23
clamav                           STOPPED   Not started
cron                             RUNNING   pid 803, uptime 0:38:25
dovecot                          RUNNING   pid 813, uptime 0:38:25
fail2ban                         STOPPED   Not started
fetchmail                        STOPPED   Not started
mailserver                       RUNNING   pid 8, uptime 0:39:06
mta-sts-daemon                   STOPPED   Not started
opendkim                         RUNNING   pid 848, uptime 0:38:24
opendmarc                        RUNNING   pid 864, uptime 0:38:24
postfix                          RUNNING   pid 876, uptime 0:38:24
postgrey                         STOPPED   Not started
postsrsd                         STOPPED   Not started
rspamd                           STOPPED   Not started
rspamd-redis                     STOPPED   Not started
rsyslog                          RUNNING   pid 807, uptime 0:38:25
saslauthd_ldap                   STOPPED   Not started
saslauthd_mysql                  STOPPED   Not started
saslauthd_pam                    STOPPED   Not started
saslauthd_rimap                  STOPPED   Not started
saslauthd_shadow                 STOPPED   Not started
update-check                     RUNNING   pid 822, uptime 0:38:24

opencli email-server login

Opens an interactive bash shell inside the mailserver container. Type exit to leave it.

Ports

Display ports currently in use by the mailserver:

opencli email-server ports

Example output

# opencli email-server ports
Published ports:

25/tcp -> 0.0.0.0:25
25/tcp -> [::]:25
143/tcp -> 0.0.0.0:143
143/tcp -> [::]:143
465/tcp -> 0.0.0.0:465
465/tcp -> [::]:465
587/tcp -> 0.0.0.0:587
587/tcp -> [::]:587
993/tcp -> 0.0.0.0:993
993/tcp -> [::]:993

Update Check

Check for container package updates:

opencli email-server update-check

Example output

# opencli email-server update-check
...
Listing... Done
libssl3/oldstable-security 3.0.15-1~deb12u1 amd64 [upgradable from: 3.0.14-1~deb12u2]

Update Packages

Update container packages:

opencli email-server update-packages

Example output

# opencli email-server update-packages
...
The following packages will be upgraded:
  libssl3 openssl
2 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Do you want to continue? [Y/n]

Versions

Display versions:

opencli email-server versions

Example output

# opencli email-server versions
Mailserver:    v14.0.0

amavisd-new:   1:2.13.0-3
clamav:        1.0.3+dfsg-1~deb12u1
dovecot-core:  1:2.3.19.1+dfsg1-2.1
fail2ban:      1.0.2-2
fetchmail:     6.4.37-1
getmail6:      6.18.11-2
rspamd:        3.8.4-1~93fa4f6dc~bookworm
opendkim:      2.11.0~beta2-8+deb12u1
opendmarc:     1.4.2-2+b1
postfix:       3.7.10-0+deb12u1
spamassassin:  4.0.0-6
supervisor:    4.2.5-1

Uninstall

To uninstall the mailserver:

opencli email-server uninstall

Example output

# opencli email-server uninstall
Uninstalling the mailserver...
Are you sure you want to uninstall the MailServer and remove all its configuration? (y/n)
y
MailServer uninstalled successfully.

Debug

Add --debug to any email-server command to display verbose information.

Usage

opencli email-usage refreshes /etc/openpanel/openpanel/core/users/<USERNAME>/emails.yml, the cached list of a user's email accounts with their disk usage and quota that OpenPanel reads. The mailserver must be running.

Refresh a single user:

opencli email-usage <USERNAME>

Example output

# opencli email-usage stefan
Updated /etc/openpanel/openpanel/core/users/stefan/emails.yml (3 email accounts)

Refresh all users:

opencli email-usage --all

Example output

# opencli email-usage --all
Updated /etc/openpanel/openpanel/core/users/stefan/emails.yml (3 email accounts)
Skipped demo: user not found in the database.
Updated /etc/openpanel/openpanel/core/users/testuser/emails.yml (0 email accounts)

Users that aren't in the database (for example suspended accounts) are skipped and their file is left unchanged.

When an email account reaches 90% of its quota, the user gets an email listing those accounts if the notifications module is enabled and they have notify_email_quota_limit turned on. It's sent once per account, and again only after usage drops below 90% and reaches it again.

Webmail

Display current webmail domain:

opencli email-webmail

Example output

# opencli email-webmail
webmail.example.com

Set 'webmail.example.com' as a webmail domain:

opencli email-webmail domain webmail.example.com

Example output

# opencli email-webmail domain webmail.example.com
Webmail domain updated to https://webmail.example.com

Add --debug to display verbose information.

Rate limits

opencli email-ratelimit generates postfwd rate-limiting rules for users and domains, based on the max_hourly_email limit of their plan.

Show current rules:

opencli email-ratelimit

Example output

# opencli email-ratelimit
=== /usr/local/mail/openmail/postfwd/postfwd.cf ===
id=limit_stefan_example_com ; [email protected] ; protocol_state==RCPT
                action=rate(stefan_ratelimit/100/3600/450 4.7.1 sorry, OpenPanel account reached limit of 100 emails per hour)

---
3 lines total

Regenerate rules for all users:

opencli email-ratelimit --all-users

Example output

# opencli email-ratelimit --all-users
OK: stefan limit=100/hr domain=example.com
OK: stefan limit=100/hr domain=example.net
OK: demo limit=50/hr domain=demo.net
---
Generated 9 lines written to /usr/local/mail/openmail/postfwd/postfwd.cf

Regenerate rules for a single user (removes their rules, re-fetches their domains and adds them again):

opencli email-ratelimit --username=<USERNAME>

Example output

# opencli email-ratelimit --username=stefan
Updating rules for user: stefan
OK: stefan limit=100/hr domain=example.com
OK: stefan limit=100/hr domain=example.net
---
Done. 9 lines in /usr/local/mail/openmail/postfwd/postfwd.cf

Add or update the rule for a single domain:

opencli email-ratelimit --domain=<DOMAIN>

Example output

# opencli email-ratelimit --domain=example.com
Updating rule for domain: example.com
Updating: limit_stefan_example_com
OK: stefan limit=100/hr domain=example.com
---

Remove rules for a user or a domain:

opencli email-ratelimit --delete-user=<USERNAME>
opencli email-ratelimit --delete-domain=<DOMAIN>

Example output

# opencli email-ratelimit --delete-user=demo
Deleting all rules for user: demo
Removed all rules for user 'demo'.
---
Done. 6 lines in /usr/local/mail/openmail/postfwd/postfwd.cf

# opencli email-ratelimit --delete-domain=example.net
Deleting rule for domain: example.net
Removed rule: limit_stefan_example_net
---
Done. 3 lines in /usr/local/mail/openmail/postfwd/postfwd.cf

Add --skip-reload to not reload postfix after the change.

Email users whose account reached the hourly limit:

opencli email-ratelimit --notify

Example output

# opencli email-ratelimit --notify
stefan: 37 email(s) rejected, user notified.
demo: 4 email(s) rejected, already notified today.

It reads the last 30 minutes of the mailserver log for emails rejected by the hourly limit and emails each account's owner once a day, if they have Hourly email limit reached turned on. It runs every 30 minutes from cron, and does nothing when the mailserver isn't running.

Fix mail permissions

Set the correct owner on mail folders for all domains:

opencli email-quotas

Example output

# opencli email-quotas
2026-09-24 10:30:00 : Total mail domains in /home/*/mail/: [2]
2026-09-24 10:30:00 : [*] DOMAIN: example.com [1/2]
2026-09-24 10:30:00 : Checking username and docker context for domain..
...
2026-09-24 10:30:01 : Finished processing a total of 2 domains.

Manage

Run a command inside the mailserver container:

opencli email-manage <COMMAND> [<ARGS>...]

Example:

opencli email-manage postqueue -p

Example output

# opencli email-manage postqueue -p
Mail queue is empty

Emails

opencli email-setup command is used to create and manage email accounts. It runs the docker-mailserver setup command inside the mailserver container.

Commands that add, change or delete email accounts, aliases, quotas, restrictions, relay settings or Dovecot master accounts print no output when they succeed. If the mailserver is not running, the change is written directly to the mailserver configuration files and this warning is shown:

Example output

# opencli email-setup email add [email protected] 'StrongPass1'
Warning: 'openadmin_mailserver' is not running - writing directly to mailserver config files instead.

To view a list of all available sub-commands:

opencli email-setup help

Example output

# opencli email-setup help
SETUP(1)

NAME
    setup - 'docker-mailserver' Administration & Configuration CLI

SYNOPSIS
    setup [ OPTIONS... ] COMMAND [ help | ARGUMENTS... ]

    COMMAND := { email | alias | quota | dovecot-master | config | relay | fail2ban | debug } SUBCOMMAND
...

List emails

To view a list of all email addresses on server:

opencli email-setup email list

Example output

# opencli email-setup email list
* [email protected] ( 5.4M / 1G ) [0%]
* [email protected] ( 12K / ~ ) [0%]

Create email

To create new email account:

opencli email-setup email add <EMAIL ADDRESS> [<PASSWORD>]

Change password

To change password for email account:

opencli email-setup email update <EMAIL ADDRESS> [<PASSWORD>]

Delete email

To delete an email account:

opencli email-setup email del [ OPTIONS... ] <EMAIL ADDRESS> [ <EMAIL ADDRESS>... ]

Example output

# opencli email-setup email del [email protected]
Do you want to delete the mailbox as well (removing all mails)? [Y/n] y

Restrict email

To suspend sending or receving of emails for an email account:

opencli email-setup email restrict <add|del|list> <send|receive> [<EMAIL ADDRESS>]

Example output

# opencli email-setup email restrict list send
[email protected]		REJECT

Aliases

The opencli email-setup alias command is used to manage email aliases:

List Aliases

To list all email aliases:

opencli email-setup alias list

Example output

# opencli email-setup alias list
* [email protected] [email protected]
* [email protected] [email protected]

Add Alias

To create a new email alias:

opencli email-setup alias add <EMAIL ADDRESS> <RECIPIENT>

Delete Alias

To delete existing email alias:

opencli email-setup alias del <EMAIL ADDRESS> <RECIPIENT>

Quotas

The opencli email-setup quota command is used to manage email quotas:

Set Quota

To set quota for email account:

opencli email-setup quota set <EMAIL ADDRESS> [<QUOTA>]

Remove Quota

To remove quota for email account:

opencli email-setup quota del <EMAIL ADDRESS>

Dovecot Master

Dovecot Master accounts are used to auto-login from OpenPanel interface to any email address.

opencli email-setup dovecot-master

List Dovecot Master

To list all dovecot-master accounts:

opencli email-setup dovecot-master list

Example output

# opencli email-setup dovecot-master list
* admin

Add Dovecot Master

To create a new dovecot-master account:

opencli email-setup dovecot-master add <USERNAME> [<PASSWORD>]

Update Dovecot Master

To chaneg password for existing dovecot-master account:

opencli email-setup dovecot-master update <USERNAME> [<PASSWORD>]

Add Dovecot Master

To delete an dovecot-master account:

opencli email-setup dovecot-master del [ OPTIONS... ] <USERNAME> [ <USERNAME>... ]

DKIM

To manage DKIM use opencli email-setup config command:

Setup DKIM

To setup DKIM:

opencli email-setup config dkim [ ARGUMENTS... ]

Example output

# opencli email-setup config dkim
Creating DKIM private key '/tmp/docker-mailserver/opendkim/keys/example.com/mail.private'
Creating DKIM KeyTable
Creating DKIM SigningTable
Creating DKIM TrustedHosts

Email Relay

To setup email relay use opencli email-setup relay command:

Add Auth

To add auth to email relay:

opencli email-setup relay add-auth <DOMAIN> <USERNAME> [<PASSWORD>]

Add Domain

To add auth domain to email relay:

opencli email-setup relay add-domain <DOMAIN> <HOST> [<PORT>]

Exclude Auth

To exclude auth from email relay:

opencli email-setup relay exclude-domain <DOMAIN>

Fail2Ban

Fail2Ban is used for restricting and blocking access to email accounts.

To display available options:

opencli email-setup fail2ban

Example output

# opencli email-setup fail2ban
Banned in custom:        198.51.100.23
Banned in postfix-sasl:  203.0.113.77

Ban IP

To ban IP address from accessing mail server:

opencli email-setup fail2ban ban <IP>

Example output

# opencli email-setup fail2ban ban 198.51.100.23
Banned custom IP: 1

UnBan IP

To unban IP address and allow it to access mail server:

opencli email-setup fail2ban unban <IP>

Example output

# opencli email-setup fail2ban unban 198.51.100.23
Unbanned IP from postfix-sasl: 1

View Log

To view the fail2ban log:

opencli email-setup fail2ban log

Example output

# opencli email-setup fail2ban log
2026-09-24 09:41:02,114 fail2ban.actions [512]: NOTICE  [postfix-sasl] Ban 203.0.113.77
...

View Status

To view the fail2ban status:

opencli email-setup fail2ban status

Example output

# opencli email-setup fail2ban status
Status
|- Number of jail:	3
`- Jail list:	custom, dovecot, postfix-sasl

Debug

For debugging emails the following commands are available:

Fetchmail

Fetchmail is a powerful tool that can be used to debug email:

opencli email-setup debug fetchmail

Example output

# opencli email-setup debug fetchmail
fetchmail: No mail for stefan at pop.example.com

To troubleshoot emaail address login:

opencli email-setup debug login <COMMANDS>

Runs the given commands inside the mailserver container, or opens an interactive shell when no command is given.

Mail Logs

To view the mailserver logs:

opencli email-setup debug show-mail-logs

Example output

# opencli email-setup debug show-mail-logs
Sep 24 10:12:05 mail postfix/smtpd[1834]: connect from unknown[203.0.113.5]
Sep 24 10:12:06 mail postfix/qmgr[876]: 4XbLqK2mPz: from=<[email protected]>, size=1842, nrcpt=1 (queue active)
Sep 24 10:12:07 mail postfix/smtp[1840]: 4XbLqK2mPz: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[142.250.27.26]:25, delay=1.4, status=sent (250 2.0.0 OK)
...

MailServer​

Install​

Start​

Restart​

Stop​

Status​

Config​

Queue​

Flush Queue​

View​

Unhold​

Delete​

Fail2Ban​

Postfix​

Logs​

pflogsumm​

Rate-limiting (postfwd)​

Supervisor​

Login​

Ports​

Update Check​

Update Packages​

Versions​

Uninstall​

Debug​

Usage​

Webmail​

Rate limits​

Fix mail permissions​

Manage​

Emails​

List emails​

Create email​

Change password​

Delete email​

Restrict email​

Aliases​

List Aliases​

Add Alias​

Delete Alias​

Quotas​

Set Quota​

Remove Quota​

Dovecot Master​

List Dovecot Master​

Add Dovecot Master​

Update Dovecot Master​

Add Dovecot Master​

DKIM​

Setup DKIM​

Email Relay​

Add Auth​

Add Domain​

Exclude Auth​

Fail2Ban​

Ban IP​

UnBan IP​

View Log​

View Status​

Debug​

Fetchmail​

Login​

Mail Logs​

MailServer

Install

Start

Restart

Stop

Status

Config

Queue

Flush Queue

View

Unhold

Delete

Fail2Ban

Postfix

Logs

pflogsumm

Rate-limiting (postfwd)

Supervisor

Login

Ports

Update Check

Update Packages

Versions

Uninstall

Debug

Usage

Webmail

Rate limits

Fix mail permissions

Manage

Emails

List emails

Create email

Change password

Delete email

Restrict email

Aliases

List Aliases

Add Alias

Delete Alias

Quotas

Set Quota

Remove Quota

Dovecot Master

List Dovecot Master

Add Dovecot Master

Update Dovecot Master

Add Dovecot Master

DKIM

Setup DKIM

Email Relay

Add Auth

Add Domain

Exclude Auth

Fail2Ban

Ban IP

UnBan IP

View Log

View Status

Debug

Fetchmail

Login

Mail Logs